Cover Image

A HASHIN criteria investigation to predict the interaction effect of defaults on the damage of composite pipe

N. Bencherif, M. Benhaliliba


Pressurized during their service the composite pipelines are damaged either by the presence of defects or by their aging. The damage of composite carboxyl pipeline under the bending moment M = 1rd and several internal pressures within 40, 60, 80 bar range by the presence of two defects is studied. Using the HASHIN criterion, a numerical prediction through the calculation code ABAQUS takes the objective of evaluating the damage by interaction effect between two defects. The results are presented by evaluated curves of correlation between the moment to the damage and the parameters of orientation and location of the defects. The interaction effect of defects on damage is conditioned by their locations along the pipeline surface. The obtained results show a strong influence of the defects on the level and the modes of failure as well as their response till the damage.

Full Text:



Lui, Y., Shao, X., Yang H., Zhao Y. and Qu L., Compound Pipes in Oil and Gas Engineering,’ Proceedings of the International conference on Pipelines and Trenchless Technology 2009, ICPTT 2009, Advances and Experiences with Pipelines and Trenchless Technology for Water, Sewer, Gas and Oil Applications, 2009, 361, 1863-1873

Frost S.R. and Cervenka A., ‘Glass Fibre-reinforced Epoxy Matric Filament-wound Pipes for use in the Oil Industry,’Composite Manufacturing, 1994, 5, 2, 73-81.

Auwal Muhammad,ErcanŞevkat, “Experimental and Numerical Study of Energy Absorption Behaviour of Glass and Carbon Epoxy Composite Tubes under Static Compressive Loading” IOSR Journal of Applied Physics (IOSR-JAP) e-ISSN: 2278-4861.Volume 6, Issue 4 Ver. III (Jul-Aug. 2014), PP 30-37

J. Lemaître et J.L. Chaboche - “Mécanique des matériaux solides”, Edition Dunod, 2ème édition, 1988.

F. Lachaud et L. Michel, “Etude de l’endommagement de matériaux composites carbones à matrice thermodurcissable et thermoplastique”, Mécanique Industrielle et Matériaux, vol. 50, N° 2, 1997

S. H. Lee and A. M. Wass, Compressive Response and Failure of Fiber Reinforced Unidirectional Composites, International Journal of Fracture, 100, 1999, 275 - 306.

S. Palanivelu, W. Paepegem, J. Degrieck, J. Vantomme, D. Kakogiannis, J. Ackeren, D. Hemelrijik and J. Wastiels, Crushing and Energy Absorption Performance of Different Geometrical Shapes of Small – Scale Glass Polyester Composite Tubes under Quasi Static Loading Conditions, Composite Structures, 93, 2011, 992 – 1007.

S. H. Kim,C. H. Park, Direct impregnation of thermoplastic melt into flax textile reinforcement for semi-structural composite parts, Industrial Crops and Products 95, 2017, pp. 651–663

Andersons J, König M. Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction. Composites Science and Technology. 2004; 64:2139-52.

Xia M., Takayanagi H., and Kemmochi K., ‘Bending Behaviour of Filament-Would Fiber-reinforced Sandwich Pipes,’ Composite Structures, 2002, 56, 2, 201-210.

Xia M., Kemmochi K. and Takayanagi H., ‘Analysis of Filament-Wound Fiber-reinforced Sandwich Pipe under Combined Internal Pressure and Thermomechanical Loading,’ Composite Structures, 51, 3, 273-283.

Soden P.D., Kitching R., Tse P.C., ‘Experimental Failure Stresses for ±55° Filament Wound Glass Fibre Reinforced Plastic Tubes under Biaxial Loads,’ Composites, 1978, 9, 247- 250.

Guz I. A., Menshykova M., Paik J.K., ‘Thick-Walled Composite Tubes for Offshore Applications: An Example of Stress and Failure Analysis for Filament-Wound Multi-Layered Pipes,’ Ships and Offshore Structures, 2015.

Kuang Y., Morozov E.V., Ashraf M.A. and Shankar K.,Numerical Analysis of the Mechanical Behaviour of Reinforced Thermoplastic Pipes under Combined External Pressure and Bending,’ Composite Structures, 2015, 131, 453-461.

Hossain R., Carey J. and Mertiny P., ‘Framework for a Combined Netting Analysis and Tsai-Wu based Design Approach for Braided and Filament-Wound Composites,Journal of Pressure Vessel Technology, 2013, 135, 031204-1 - 031204-7.

Tsai S.W., and Wu E.M., ‘A General theory of Strength for Anisotropic Materials,’ Journal of Computation Material, 1971, 5, 1, 58-80.

Xia M., Takayanagi H., and Kemmochi K., ‘Analysis of Multi-Layered Filament-Wound Composite Pipes under Internal Pressure,’ Composite Structures, 2001, 53, 4, 483-491.

S. H. Lee and A. M. Wass, Compressive Response and Failure of Fiber Reinforced Unidirectional Composites, International Journal of Fracture, 100, 1999, 275 - 306.

S. Ocheleski and P. Gotowicki, Experimental Assessment of Energy Absorption Capability of Carbon – epoxy and Glass – epoxy, Composite Structure, 70, 2005, 215 – 224.

ABAQUS user manuals, (Vol. 1 – 3, 2014).

The American Society of Mechanical Engineers, "Pipeline Transportation Systems for Liquid Hydrocarbons and other Liquids, ASME.B31.4, 1998 Edition.

Copyright (c) 2020 Turkish Journal of Materials

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.