Cover Image

Single-layer drying modeling of pumpkin (Cucurbita Maxima)

Haydar Küçük, Uğur Akbulut, Adnan Midilli

Abstract


The main objective of this paper is to evaluate and assess the chosen appropriate form of drying curves available in the open literature for thin layer drying of pumpkin (Cucurbita maxima) pulp pieces. This goal was achieved by applying non-linear regression analysis included in the Statistica software to the experimental data and determining the best model among the semi-theoretical and/or empirical 23 alternative mathematical models utilizing seven evaluation criteria. For this purpose, thin-layer drying tests were carried out by using a laboratory-scale dryer. The experiments were performed at 50, 60, 70, and 80 oC drying temperatures, 62-75 percent of relative humidity and 1.4 m/s of drying air velocity for 50 g of pulp piece of pumpkin with 3 mm and 5 mm thickness. Upon analyzing the experimental results, it was found that Alibas (modified Midilli-Kucuk) model was selected as the most effective model for drying Cucurbita maxima in a single layer among the adopted drying conditions.


Full Text:

PDF

References


I. Dincer and S. Dost, “An analytical model for moisture diffusion in solid objects during drying,” Drying Technology, 13 (1-2), pp. 425-435, 1995.

C. W. Hall, Drying and Storage of Agricultural Crops. AVI Publiching Company Inc., Westport, CT, USA, 1980.

R. B. Keey, Drying of Loose and Particulate Materials. Hemisphere Publishing Corporation, New York, USA, 1992.

P. H. Davis, Flora of Turkey and the East Aegean Islands. Vol. 4, Edinburgh University Press, UK, 1972.

R. D. Soares, M. A. Chaves, R. C. F. Bonomo, N. J. Da Silva, and M. Babic, “The selection criteria of the best mathemathics model for basil (Ocimum Basilicum, L.) thin-layer drying kinetics,” Casopis za Procesnu Tehniku i Energetiku u Poljoprivredi, 11(4), pp. 161–165, 2007.

H. Kucuk, A. Midilli, A. Kilic, and I. Dincer, “A review on thin-layer drying-curve equations,” Drying Technology, 32(7), pp. 757-773, 2014.

S. K. Chin, C. L. Law, C. V. S. Supramaniam, P. G. Cheng, and A. S. Mujumdar, “Convective drying of Ganoderma tsugae Murrill and effect of temperature on basidiospores,” Drying Technology, 26(12), pp. 1524–1533, 2008.

U. Yücel, “Evaluation of high pressure pretreatment for enhancing the drying rate of selected fruits and vegetables,” M.Sc. Dissertation, Middle East Technical University, Ankara, Türkiye, 2006.

I. Alibas, “Microwave, air and combined microwave-air-drying parameters of pumpkin slices,” Lwt-Food Science and Technology, 40(8), pp. 1445-1451, 2007.

I. Doymaz, “The kinetics of forced convective air-drying of pumpkin slices,” Journal of Food Engineering, 79(1), pp. 243-248, 2007.

K. Sacilik, “Effect of drying methods on thin-layer drying characteristics of hull-less seed pumpkin (Cucurbita pepo L.),” Journal of Food Engineering, 79(1), pp. 23-30, 2007.

M. S. Zenoozian, H. Feng, S. M. A Razavi, F. Shadidi, and H. R. Pourreza, “Image analysis and dynamic modeling of thin-layer drying of osmotically dehydrated pumpkin,” Journal of Food Processing and Preservation, 32(1), pp. 88-102, 2008.

R. P. F. Guine, F. Henrriques, and M. J. Barroca, “Mass transfer coefficients for the drying of pumpkin (Cucurbita moschata) and dried product quality,” Food and Bioprocess Technology, 5(1), pp. 176-183, 2012.

A. Midilli and H. Kucuk, “Mathematical modeling of thin layer drying of pistachio by using solar energy,” Energy Conversion and Management, 44, pp. 1111-1122, 2003.

E. K. Akpinar, A. Midilli, and Y. Bicer, “Experimental investigation of drying behavior and conditions of pumpkin slices via a cyclone-type dryer,” Journal of the Science of Food and Agriculture, vol. 83, pp. 1480-1486, 2003.

T. Y. Tunde-Akintunde and G. O. Ogunlakin, “Influence of drying conditions on the effective moisture diffusivity and energy requirements during the drying of pretreated and untreated pumpkin,” Energy Conversion and Management, 52(2), pp. 1107-1113, 2011.

Z. Teferi, T. S. Workneh, and K. Woldetsadik, “Thin-layer drying of pumpkin fruit slices,” Advanced Materials Research, vol. 824, pp. 283-292, 2013. Advances in Materials and Systems Technologies IV. A. O. A. Ibhadode and E. O. Aluyor, (Eds.), Trans. Tech. Publications Ltd., Zurich, Switzerland, 2013.

M. Mokhtarian, F. Koushki, H. Bakhshabadi, B. Askari, A. D. Garmakhany, and S. H. Rashidzadeh, “Feasibility investigation of using artificial neural network in process monitoring of pumpkin air drying,” Quality Assurance and Safety of Crops and Foods, 6(2), pp. 191-199, 2014.

W. Jittanit, “Kinetics and temperature dependent moisture diffusivities of pumpkin seeds during drying,” Kasetsart Journal - Natural Science, 45(1), pp. 147-158, 2011.

E. K. Akpinar, “Determination of suitable thin layer drying curve model for some vegetables and fruits,” Journal of Food Engineering, 73(1), pp. 75–84, 2006.

N. E. Perez and M. E. Schmalko, “Convective drying of pumpkin: Influence of pretreatment and drying temperature,”. Journal of Food Process Engineering, 32(1), pp. 88-103, 2009.

T. Y. Tunde-Akintunde and G. O. Ogunlakin, “Mathematical modeling of drying of pretreated and untreated pumpkin,” Journal of Food Science and Technology, 50(4), pp. 705-713, 2013.

R. P. F. Guiné, S. Pinho and M. J. Barroca, “Study of the convective drying of pumpkin (Cucurbita maxima),” Food and Bioproducts Processing, vol. 89, pp. 422-428, 2011.

A. Midilli, “Determination of pistachio drying behavior and conditions in a solar drying system,” International Journal of Energy Research, vol. 25, pp. 715-725, 2001.

W. V. Cruess, Commercial Fruit and Vegetable Products. McGraw-Hill, New York, USA, 1958.

W. B. Van Arsdel and M. T. Copley, Food Dehydration: Products and Technology. AVI Publications Company, Westport, Connecticut, USA, 1964.

A. Midilli, H. Kucuk, and Z. Yapar, “A new model for single-layer drying,” Drying Technology, 20(7), pp. 1503-1513, 2002.

M. Şimşek, H. Kucuk, A. Midilli, “Experimental investigation and mathematical modeling of microwave thin layer drying behavior of apricot, kiwi and mint leaves,” Recep Tayyip Erdogan University Journal of Science and Engineering, 2(2), pp. 13-35, 2021

W. A. M. McMinn, C. M. McLoughlin, and T. R. A. Magee, “Thin-layer modeling of microwave, microwave-convective, and microwave-vacuum drying of pharmaceutical powders,” Drying Technology, 23(3), pp. 513-532, 2005.

A. Ghazanfari, S. Emami, L. G. Tabil, and S. Panigrahi, “Thin-layer drying of flax fiber, II: Modeling drying process using semi-theoretical and empirical models,” Drying Technology, 24(12), pp. 1637-1642, 2006.

A. Vega-Ga´lvez, A. Ayala-Aponte, E. Notte, L. de la Fuente, and R. Lemus-Mondaca, “Mathematical modeling of mass transfer during convective dehydration of brown algae macrocystis pyrifera,” Drying Technology, 26(12), pp. 1610-1616, 2008.

L. A. Mohamed, C. S. E. Kane, M. Kouhila, A. Jamali, M. Mahrouz, and N. Kechaou, “Thin layer modelling of Gelidium sesquipedale solar drying process,” Energy Conversion and Management, 49(5), pp. 940-946, 2008.

N. Kumar, B. C. Sarkar, and H. K. Sharma, “Mathematical modelling of thin layer hot air drying of carrot pomace,” Journal of Food Science and Technology, 49(1), pp. 33-41, 2012.

A. Kaleta, K. Gornicki, R. Winiczenko, and A. Chojnacka, “Evaluation of drying models of apple (var. Ligol) dried in a fluidized bed dryer,” Energy Conversion and Management, vol. 67, pp. 179-185, 2013.

B. R. Chavan, A. Yakupitiyage, and S. Kumar, “Mathematical modeling of drying characteristics of Indian mackerel (Rastrilliger kangurta) in solar-biomass hybrid cabinet dryer,” Drying Technology, 26(12), pp. 1552-1562, 2008.

M. Ganesapillai, I. Regupathi, and T. Murugesan, “An empirical model for the estimation of moisture ratio during microwave drying of plaster of paris,” Drying Technology, 26(7), pp. 963-978, 2008.

I. L. Pardeshi, S. Arora, and P. A. Borker, “Thin-layer drying of green peas and selection of a suitable thin-layer drying model,” Drying Technology, 27(2), pp. 288-295, 2009.

C. A. Ruiz, C. Francisco, L.-R Fernando, and R. Aida, “Thin layer drying behavior of industrial tomato bye-products in a convective dryer at low temperatures,” Research Journal of Biotechnology, 8(2), pp. 50-60, 2013.

M. Aghbashlo, M. H. Kianmehr, S. Khani, and M. Ghasemi, “Mathematical modelling of thin-layer drying of carrot,” International Agrophysics, 23(4), pp. 313-317, 2009.

I. Doymaz, “Sun drying of seedless and seeded grapes,” Journal of Food Science and Technology, 49(2), pp. 214-220, 2012.

A. Balbay, and Ö. Şahin, “Microwave drying kinetics of a thin-layer liquorice root,” Drying Technology, 30(8), pp. 859-864, 2012.

I. Alibas, “Selection of the best suitable thin-layer drying mathematical model for vacuum dried red chili pepper,” Journal of Biological and Environmental Sciences, 6(17), pp. 161-170, 2012.

S. K. Chin, C. L. Law, C. V. Supramaniam, and P. G. Cheng, “Thin-layer drying characteristics and quality evaluation of air-dried Ganoderma tsugae Murrill,” Drying Technology, 27(9), pp. 975-984, 2009.

H. O. Menges, and C. Ertekin, “Modelling of air drying of Hacıhaliloglu-type apricots,” Journal of the Science of Food and Agriculture, vol. 86, pp. 279-291, 2006.

B.R. Chavan, A. Yakupitiyage, and S. Kumar, “Mathematical modeling of drying characteristics of Indian mackerel (Rastrilliger kangurta) in solar-biomass hybrid cabinet dryer,” Drying Technology, 26(12), pp. 1552-1562, 2008.

I. E. Saeed, “Solar drying of roselle (Hibiscus sabdariffa L.) Part I: Mathematical modelling, drying experiments, effects of the drying conditions,” Agricultural Engineering International: CIGR Journal, 12(3), pp. 1-13, 2010.




URN: https://sloi.org/urn:sl:tjoee73258



Copyright (c) 2022 Turkish Journal of Electromechanics and Energy

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Indexed in: